Vessel Guide

Models › Jeanneau

Jeanneau Sun Odyssey 32

Built 2002–2005 by Jeanneau (France)

Is she right for you? Take the quiz Own one? Start her custom manual Looking at one? Sea-trial scorecard

About the Jeanneau Sun Odyssey 32

Researched from public sources for this model. Any individual boat may have been modified or repowered — confirm before relying on any figure.

Illustration of a Jeanneau Sun Odyssey 32
Illustration, not a photo of this model. AI-generated illustration of a typical mid-size cruising sloop.
Built
2002–2005
Builder
Jeanneau (France)
Designer
Philippe Briand
Length
31.42 ft
Waterline
27.92 ft
Draft
4.92 ft
Displacement
10,009 lb
Ballast
3,020 lb
Hull
fiberglass
Hull / keel
fin keel
Rig
sloop
Fuel
18 gal
Water
45 gal
Stern thruster
not fitted
Steering
tiller
Tank capacities — where the figures come from
  • Fuel 18 gal
    “70 l” — builder, jeanneau.com · “Fuel tanks 70 litres, synthetic” — search excerpt (2003), jachtmakelaardijkappers.nl
    Jeanneau's model page (Briand design, 9.6 m, 4,540 kg, matching the 2002-05 boat) gives 70 L = 18.5 US gal.
  • Water 45 gal
    “170 l” — builder, jeanneau.com · “Watertank Size: 140” — search excerpt (2003), networkyachtbrokers.com
    The builder gives 170 L = 44.9 US gal. One UK listing says 140 (unit not given; one boat).
  • Holding unknown
    Builder page gives no holding tank figure.
  • Water heater unknown
    Jeanneau's model page lists only tank capacities (70 L fuel, 170 L water); the Practical Sailor used-boat review does not mention hot water.

Tanks are often replaced or added on older boats — check the tank labels or a survey for yours.

Thrusters and steering — where this comes from
  • Bow thruster unknown
    Jeanneau's archived model page lists dimensions only; no option list found.
  • Stern thruster not fitted
    Our earlier figure of none has no source, and nothing was found either way.
  • Steering tiller
    “The Sun Odyssey 32's tiller steering is a notable feature for a 32-ft. cruising boat.” — review (2002-2005), practical-sailor.com · “my SO32, the lever on the emergency tiller is pathetically short to clear the wheel and binnacle.” — search excerpt, jeanneau.proboards.com
    Practical Sailor's used-boat review of the 2002-05 boat describes tiller steering; an owners'-forum post shows some Sun Odyssey 32s have a wheel on a binnacle, consistent with a wheel option. No builder document was found stating which was standard.

Thrusters and steering are often replaced — check the units on your boat before ordering parts.

Sources disagree on hp of the standard engine — left blank rather than guessed.

Solid hand-laid hull with vinylester skin coat; resin-infused deck. Deck-stepped Sparcraft mast. Stainless steel holding tank aft. Sister Sun Fast 32i shares hull and deck with a deeper (6.4 ft) keel and taller rig. Year range is the span Practical Sailor gives for this construction.

Engines fitted

Boats of the same model can differ — check which engines yours actually has before ordering parts.

Generator

No generator mentioned in the builder page or review.

Manuals and brochures online

Hosted by the builder or an owners' association; they own the copyright.

Known problems for this model

Engines & parts

Yanmar 2GM / 2GM20F parts: good

Factory standard engine — you entered “Yanmar 2GM20”

Well supported by Yanmar dealers and aftermarket; stainless mixing elbows that replace the OEM part numbers are widely sold.

Parts sources: Mack Boring & Parts (Yanmar distributor), HDI Marine (stainless exhaust elbows), Parts4Engines

Common problems (2)
  • Nearly blocked mixing elbow exhaust
    Owners find the exhaust port of the mixing elbow almost completely blocked while the engine still runs; a failed U-elbow has also let water into a cylinder and cracked a piston.
    sailnet.com · practical-sailor.com
  • Noise and vibration from soft mounts engine
    Worn soft engine mounts are a common cause of the vibration owners complain about; better aftermarket mounts are available.
    practical-sailor.com
Maker’s service schedule (2)
Fuel filters & water separator250 hrs
“The normal replacement interval for the element is 250 hours ... Filter cleaning First time 50 hours Filter element repl” — manufacturer, c320.org
Air filter / intake silencer250 hrs
“Washing period Every 250 hours” — manufacturer, c320.org
Service part numbers (10)
Oil filter Yanmar 119305-35170
Replaces 119305-35151, 119660-35150
“2GM20F Basic Service Kit ... 119305-35170 FILTER ASSY, D68XL65” — dealer, oldportmarine.com · “Suitable for: ... Yanmar 2GM, Yanmar 2GMF, Yanmar 2GM20, Yanmar 2GM20-YEU, Yanmar 2GM20F” — dealer, marinepartsystem.com
Fuel filter Yanmar 104500-55710
“Fuel Filter Element 1 104500-55710 / Fuel Filter O-Ring 1 24341-000440” — dealer, ellebogen.com · “2GM20F Basic Service Kit ... 104500-55710 ELEMENT, FUEL FILTER” — dealer, oldportmarine.com
Raw-water impeller
Japan-built 2GM / 2GM20(F) (serial not starting with E)
Yanmar 124223-42092
“Impeller 1 124223-42092 / Impeller Gasket 1 124223-42110” — dealer, ellebogen.com · “2GM20F Basic Service Kit ... 124223-42092 IMPELLER, PUMP” — dealer, oldportmarine.com
Raw-water impeller
European-built GM-YEU (serial starting with E)
Yanmar 128990-42570
Replaces 128990-42200
“Impeller & O-ring Kit-128990-42570 For the GM series engines with serial numbers beginning with an E” — dealer, oldportmarine.com · “(Supersedes part number: 128990-42200) ... GM-YEU series engines:(Serial number begins with an E)2GM20-YEU” — dealer, palmerpower.com
Drive belt Yanmar 25132-003700
“Alternator Belt 1 25132-003700” — dealer, ellebogen.com · “2GM20F Basic Service Kit ... 25132-003700 V-BELT, A37” — dealer, oldportmarine.com
Drive belt Yanmar 104511-78780
“S/W Pump Belt 1 104511-78780” — dealer, ellebogen.com · “2GM20F Basic Service Kit ... 104511-78780 V-BELT, M/19” — dealer, oldportmarine.com
Air filter Yanmar 128270-12540
“Air Filter Element 1 128270-12540” — dealer, ellebogen.com · “2GM20F Basic Service Kit ... 128270-12540 ELEMENT, AIR CLEANER” — dealer, oldportmarine.com
Zinc / anode
raw-water 2GM / 2GM20; also sold for the F (heat-exchanger) versions
Yanmar 27210-200300
“27210-200300 Yanmar Engine Zinc Anode For 2GM(D), 3GM(D), 2GM20, 3GM30” — dealer, zincsforboats.com · “It fits Yanmar 2GM, 2GM20F, 2GM15, 2GM20, 3GM30F, 3GMF, 3HMF, 3GM30H engines.” — dealer, deltadieselparts.com
Thermostat
2GM20F / 2GMF (fresh-water cooled)
Yanmar 121750-49800
“Thermostat 1 121750-49800 / Thermostat Gasket 1 129350-49541” — dealer, ellebogen.com · “Thermostat for Yanmar 2GMF, 3GMF, 3HMF, 2GM20F, 3GM30F, 3HM35F / REC121750-49800” — dealer, marineparts.eu
Thermostat
2GM / 2GM20 (raw-water cooled)
Yanmar 105582-49200
“Replaces Yanmar Marine 105582-49200 ... 1GM, 2GM, 3GM, 1GM10, 2GM20, 3GM30” — dealer, repowermarine.com · “1GM10, 2GM20 & 3GM30 Thermostat to fit raw water cooled engine versions ... equivalent to 105582-49200” — dealer, parts4engines.com

From the engine maker’s parts lists, or two independent parts dealers. Numbers change with serial number and get superseded — check yours before ordering.

Yanmar 3GM / 3GM30F parts: good

Factory optional engine — you entered “Yanmar 3GM”

Very popular (used 3GM30Fs sell for $3,000+) and supported by a strong parts network. Cylinder head overhauls (valve seals, lapping, injector service) are a common, parts-supported repair.

Parts sources: Mack Boring & Parts (Yanmar distributor), HDI Marine (stainless exhaust elbows), Parts4Engines

Common problems (2)
  • Overheating at cruise rpm cooling
    The 3GM30F has a known overheating tendency linked to its heat exchanger; owners also trace it to coked elbows, worn impellers, scaled heat exchangers or air in the raw water circuit. Some heat exchangers were replaced under warranty.
    forums.sailboatowners.com
  • Mixing elbow corrosion exhaust
    OEM elbows corrode internally and should be inspected or replaced with stainless versions before they let water into the engine.
    practical-sailor.com · facebook.com
Maker’s service schedule (2)
Fuel filters & water separator250 hrs
“The normal replacement interval for the element is 250 hours ... Filter cleaning First time 50 hours Filter element repl” — manufacturer, c320.org
Air filter / intake silencer250 hrs
“Washing period Every 250 hours” — manufacturer, c320.org
Service part numbers (10)
Oil filter Yanmar 119305-35170
Replaces 119305-35151, 119660-35150
“3GM30F Basic Service Kit ... 119305-35170 1 FILTER ASSY, D68XL65” — dealer, oldportmarine.com · “Maintenance kit Yanmar 2GMF, 2GM20F, 3GMF, 3GM30F ... Yanmar 119305-35170 Oil Filter” — dealer, marinedustrie.com
Fuel filter Yanmar 104500-55710
“Fuel Filter Element 1 104500-55710 / Fuel Filter O-Ring 1 24341-000440” — dealer, ellebogen.com · “3GM30F Basic Service Kit ... 104500-55710 1 ELEMENT, FUEL FILTER” — dealer, oldportmarine.com
Raw-water impeller
Japan-built 3GM / 3GM30(F) (serial not starting with E)
Yanmar 124223-42092
“Impeller 1 124223-42092 / Impeller Gasket 1 124223-42110” — dealer, ellebogen.com · “3GM30F Basic Service Kit ... 124223-42092 1 IMPELLER, PUMP” — dealer, oldportmarine.com
Raw-water impeller
European-built GM-YEU (serial starting with E)
Yanmar 128990-42570
Replaces 128990-42200
“(Supersedes part number: 128990-42200) ... 3GM30-YEU, 3GM30C-YEU 3GM30F-YEU, 3GM30FC-YEU” — dealer, palmerpower.com · “It fits Yanmar 2GM20F, 2YM15, 3GM30F, 3GM30FC, 3TN30F, 3YM20, 3YM30, 3YM30AE engines. Cross Reference: 128990-42200” — dealer, deltadieselparts.com
Drive belt Yanmar 25132-003700
“Alternator Belt 1 25132-003700” — dealer, ellebogen.com · “3GM30F Basic Service Kit ... 25132-003700 1 V-BELT, A37” — dealer, oldportmarine.com
Drive belt Yanmar 104511-78780
“S/W Pump Belt 1 104511-78780” — dealer, ellebogen.com · “3GM30F Basic Service Kit ... 104511-78780 1 V-BELT, M/19” — dealer, oldportmarine.com
Air filter Yanmar 128270-12540
“Air Filter Element 1 128270-12540” — dealer, ellebogen.com · “3GM30F Basic Service Kit ... 128270-12540 1 ELEMENT, AIR CLEANER” — dealer, oldportmarine.com
Zinc / anode
raw-water 3GM / 3GM30; also sold for the F (heat-exchanger) versions
Yanmar 27210-200300
“27210-200300 Yanmar Engine Zinc Anode For 2GM(D), 3GM(D), 2GM20, 3GM30” — dealer, zincsforboats.com · “It fits Yanmar 2GM, 2GM20F, 2GM15, 2GM20, 3GM30F, 3GMF, 3HMF, 3GM30H engines.” — dealer, deltadieselparts.com
Thermostat
3GM30F / 3GMF (fresh-water cooled)
Yanmar 121750-49800
“Thermostat 1 121750-49800 / Thermostat Gasket 1 129350-49541” — dealer, ellebogen.com · “Thermostat for Yanmar 2GMF, 3GMF, 3HMF, 2GM20F, 3GM30F, 3HM35F / REC121750-49800” — dealer, marineparts.eu
Thermostat
3GM / 3GM30 (raw-water cooled)
Yanmar 105582-49200
“Replaces Yanmar Marine 105582-49200 ... 1GM, 2GM, 3GM, 1GM10, 2GM20, 3GM30” — dealer, repowermarine.com · “1GM10, 2GM20 & 3GM30 Thermostat to fit raw water cooled engine versions ... equivalent to 105582-49200” — dealer, parts4engines.com

From the engine maker’s parts lists, or two independent parts dealers. Numbers change with serial number and get superseded — check yours before ordering.

Yanmar 3YM30 / 3YM20 parts: good

Factory optional engine — you entered “Yanmar 3YM20”

Current-generation Yanmar with full dealer support; raw water pump impellers are Jabsco-compatible.

Parts sources: Mack Boring & Parts (Yanmar distributor), Yanmar USA genuine parts

Common problems (3)
  • Leaking heat exchangers and overheating cooling
    Owners report heat exchangers leaking (pressed-in tube joint) and overheating; trapped air in the freshwater circuit and failed impellers are other common causes.
    forums.ybw.com · forums.sailboatowners.com
  • Seawater pump leaks cooling
    The Johnson seawater pump is a frequent leak source, and leaks near the elbow hose can corrode the starter and heat exchanger studs.
    forums.ybw.com
  • Restrictive cast iron elbow exhaust
    The cast iron exhaust riser/elbow clogs with soot, raising back pressure.
    forums.ybw.com
Maker’s service schedule (18)
Engine oil & filter change150 hrs or 1 yr
“4.3.4 Inspection Every 150 Hrs (or one year). (1) Replace the Engine Oil” — manufacturer, j30.us
Replace engine oil filter250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year).” — manufacturer, j30.us
Transmission fluid change
KM marine gear (shaft drive)
150 hrs or 1 yr
“4.3.4 Inspection Every 150 Hrs (or one year). ... (2) Replace the Marine Gear oil” — manufacturer, j30.us
Transmission fluid change
SD sail-drive installations
100 hrs or 6 mo
“4.3.3 Inspection Every 100 Hrs (or six months). (1) Replace the Sail Drive Oil” — manufacturer, j30.us
Fuel filters & water separator250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year). (1) Replace the Fuel Tank Refer to 4.3.1(4). (2) Replace the Fuel Filter” — manufacturer, j30.us
Drain fuel/water separator50 hrs or 1 mo
“4.3.2 Inspection Every 50 Hrs. (or Monthly) (1) Drain the fuel/water separator.” — manufacturer, j30.us
Drain fuel tank (water/sediment)250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year). (1) Replace the Fuel Tank Refer to 4.3.1(4).” — manufacturer, j30.us
Raw-water pump impeller1,000 hrs or 4 yrs
“The impeller must be replaced with new one periodically (every 1000 hrs or 4 years whichever comes first).” — manufacturer, j30.us
Coolant replacement & freeze-point test1 yr
“Replace the fresh water coolant Every year When long life coolant is used of a specified type (see page 24), a replaceme” — manufacturer, j30.us
Air filter / intake silencer250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year).” — manufacturer, j30.us
Exhaust mixing elbow inspection250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year).” — manufacturer, j30.us
Drive belts inspect / replace250 hrs or 1 yr
“Replace the alternator driving belt with new one every 1000 hours or four years, whichever comes first, even if there is” — manufacturer, j30.us
Valve clearance check / adjust1,000 hrs or 4 yrs
“4.3.6 Inspection Every 1000 Hrs (or 4 years). (1) Inspection and Adjustment of Intake/ Exhaust Valve Clearance.” — manufacturer, j30.us
Injector test / service1,000 hrs or 4 yrs
“4.3.6 Inspection Every 1000 Hrs (or 4 years). ... (2) Inspect and Adjust the Fuel Injection Spray Condition.” — manufacturer, j30.us
Inspect/adjust fuel injection timing (dealer)1,000 hrs or 4 yrs
“4.3.6 Inspection Every 1000 Hrs (or 4 years). ... (4) Inspect and Adjust the Fuel Injection Timing” — manufacturer, j30.us
Replace flexible engine mounts1,000 hrs or 4 yrs
“Be sure to replace the Yanmar flexible engine mounts every 1000 hours or 4 years, whichever comes first.” — manufacturer, j30.us
Breather diaphragm assembly inspection (dealer)1,000 hrs or 4 yrs
“4.3.6 Inspection Every 1000 Hrs (or 4 years). ... (5) Diaphragm assembly inspection” — manufacturer, j30.us
Check wiring connectors250 hrs or 1 yr
“4.3.5 Inspection Every 250 Hrs (or one year).” — manufacturer, j30.us
Service part numbers (9)
Oil filter Yanmar 119305-35170
Replaces 119305-35151, 119660-35150
“3YM30 Basic Service Kit up to serial #E01732 ... 119305-35170 FILTER ASSY, D68XL65 (Oil)” — dealer, oldportmarine.com · “It fits Yanmar 1GM10, 2GM20F, 2YM15, 3GM, 3GM30F, 3JH2E, 3YM30, 4JH3E engines. Cross Reference: 119305-35151 119660-3515” — dealer, deltadieselparts.com
Fuel filter Yanmar 104500-55710
“Fuel Filter Element 1 104500-55710 / Fuel Filter O-Ring 1 24341-000440” — dealer, ellebogen.com · “3YM30 Basic Service Kit up to serial #E01732 ... 104500-55710 ELEMENT, FUEL FILTER” — dealer, oldportmarine.com
Raw-water impeller Yanmar 128990-42570
Replaces 128990-42200
“3YM30 Basic Service Kit up to serial #E01732 ... 128990-42570 IMPELLER KIT” — dealer, oldportmarine.com · “(Supersedes part number: 128990-42200) ... 2YM15 3YM20 3YM27A, 3YM30R 3YM30” — dealer, palmerpower.com
Drive belt
early 3YM30 / 3YM20, below the serial break
Yanmar 128990-77350
“128990-77350 3YM30 up to serial #E01732 Belt” — dealer, oldportmarine.com · “S/W Pump Belt 1 128990-77350 < E00304” — dealer, ellebogen.com
Drive belt
later 3YM30 / 3YM20, from the serial break
Yanmar 104511-78780
“104511-78780 3YM30 starting serial #E01733 Belt” — dealer, oldportmarine.com · “S/W Pump Belt 1 104511-78780 E00305 >” — dealer, ellebogen.com
Drive belt
June 2004 up to serial E20847
Yanmar 129612-42290
“Alternator V-Belt 1 129612-42290 June 2004 > / < E20847” — dealer, ellebogen.com · “3YM30 Basic Service Kit up to serial #E01732 ... 129612-42290 V-BELT, A37.5 (Alternator)” — dealer, oldportmarine.com
Drive belt
from serial E20848 (120 A alternator)
Yanmar 128990-77580
“Alternator Flat Belt 1 128990-77580 E20848 >” — dealer, ellebogen.com · “3YM30 Basic Service Kit starting serial #E20848 ... Serpentine belt 128990-77580” — dealer, oldportmarine.com
Air filter Yanmar 128270-12540
“Air Filter Element 1 128270-12540” — dealer, ellebogen.com · “128270-12540 Air Element” — dealer, oldportmarine.com
Thermostat Yanmar 128990-49800
“Thermostat 1 128990-49800 / Thermostat Gasket N/A Not Fitted” — dealer, ellebogen.com · “128990-49800 Thermostat” — dealer, oldportmarine.com

From the engine maker’s parts lists, or two independent parts dealers. Numbers change with serial number and get superseded — check yours before ordering.

Model sources (9)

practical-sailor.com · listingsport.com · mondialbroker.com · theyachtmarket.com · en.wikipedia.org · uwjachtmakelaar.nl · yanmar.com · scanboat.com · jeanneau.com

Other Jeanneau models

Researched from public sources. Spotted an error? The sources are listed above — tell us what they got wrong.