Tayana 37
Built 1976–? by Ta Yang Yacht Building Co. (Taiwan)
About the Tayana 37
Researched from public sources for this model. Any individual boat may have been modified or repowered — confirm before relying on any figure.
- Built
- 1976–?
- Builder
- Ta Yang Yacht Building Co. (Taiwan)
- Designer
- Robert Perry
- Waterline
- 31 ft
- Beam
- 11.5 ft
- Draft
- 5.67 ft
- Displacement
- 22,500 lb
- Ballast
- 8,000 lb
- Hull / keel
- full keel
- Rig
- cutter
- Propulsion
- inboard
- Fuel
- 90 gal
- Water
- 100 gal
- Number built
- 588
- Stern thruster
- none
Sources disagree on length — left blank rather than guessed.
Perry double-ender with semi-custom interiors, so layouts vary. First 40 were sold as the Ta Chiao / Ta Yang 37. One of the most-built Taiwan cruisers (588 per sailboatdata).
Known problems for this model
-
Wet decks under teak deck
Owners name wet deck core (most boats have teak decks) and leaking ports among the biggest problems to survey for.cruisersforum.com
-
Chainplates and knees rigging
Original chainplates and the knees they bolt to are a known inspection item on these older boats.cruisersforum.com
-
Black iron fuel and water tanks fuel
Original tanks were black iron and rust out; many have already been replaced by previous owners.cruisersforum.com
-
Rot in wooden bowsprit rigging
The wooden bowsprit can rot, and painted ones hide their condition; also check anchor locker, samson posts and propane locker.cruisersforum.com
-
Encapsulated ferrous ballast hull
An owner reported steel ballast encapsulated in the keel that can swell from rust if water gets in; not confirmed by builder data.cruisersforum.com
Model sources (3)
Other Tayana models
- Tayana Vancouver 42 1979–?
Researched from public sources. Spotted an error? The sources are listed above — tell us what they got wrong.