Trojan 10 Meter Sedan
Built 1982–1989 by Trojan Yachts
About the Trojan 10 Meter Sedan
Researched from public sources for this model. Any individual boat may have been modified or repowered — confirm before relying on any figure.
- Built
- 1982–1989
- Builder
- Trojan Yachts
- Length
- 33 ft
- Beam
- 13 ft
- Draft
- 2 ft
- Displacement
- 14,250 lb
- Hull
- fiberglass
- Hull / keel
- planing
- Propulsion
- inboard
- Fuel
- 242 gal
- Water
- 55 gal
- Bow thruster
- none
- Stern thruster
- none
Solid fiberglass DeltaConic hull with wide chine flats (9 deg). Original offset-companionway layout revised in 1984. Lower helm standard before 1987. Water 40 or 55 gal.
Known problems for this model
No well-sourced problem reports found yet.
Engines & parts
Crusader 350 / 454 inboard gas V8 parts: good
Factory standard engine — you entered “Crusader gas V8 inboard”
GM-based inboard engines; Crusader (now part of Pleasurecraft Marine Engine Co.) still publishes illustrated parts manuals and sells through distributors. Go2marine stocks Crusader manifolds, risers, raw water pumps and ignition parts; Osco and Barr make aftermarket manifolds, and new GM/Crusader base engines are sold by rebuilders.
Parts sources: Crusader Engines, Go2marine (Crusader parts), 1-800-RUNS-NEW (GM & Crusader base engines)
Common problems (1)
-
Clogged or failing manifolds/risers exhaust
Owners find individual risers running much hotter than the others (a sign of internal blockage) and debate replacing vs. flushing; Osco manifolds are often preferred as closest to OEM.marineengine.com · marineengine.com
Model sources (1)
Other Trojan models
- Trojan 32 Sedan (F-32) 1973–1991
- Trojan 36 Convertible 1972–1989
Researched from public sources. Spotted an error? The sources are listed above — tell us what they got wrong.